The display will show either 33:33 (wifi/gps enabled) or 11:11 (disabled)
Press fast set to select 33:33 (wifi, auto time set) 
Press slow set to select 11:11 (manual time set) 

Next, the display changes to either 60 (60HZ, USA)
or 50 (50HZ, some other countries)
If the wrong frequency is displayed, please unplug & power down then wait 
ten seconds and restart.

Display then changes to 12 (default 12 hour format)

 To change the date format to European DD/MM/YYYY (default is USA format):
 Unplug and power down, then plug in and when the display is "12"
 press fast set until the display changes to either "USA" or "EUR"
 then press slow set to choose one, and press ledcolor to set.
 Setup will resume from "12" and date format will be saved.

Display then cycles to 11:11 and may display 33:33 alternating to 55:55
while the time & date are being acquired from the network/gps signal

The display should then autoset to the correct time.

Refresh time from network - fast set + slow set

Select time, date or text display - fast set + ledcolor, 
slow set to select, toggle to set

Twelve or twenty-four hour clock format - fast set + toggle, 
slow set to select, ledcolor to set

Set up preset on/off display times - ledcolor + toggle, 
fast set/slow set to select, ledcolor to set/move to next screen

Select time zone - slow set + toggle,
fast set to select, slow set to set

Select DST on / off / auto - slow set + ledcolor,
fast set to select, toggle to set

To enter text message (up to 50 characters, including white spaces),
press and hold the "reset" button on the wifimodule board until the
blue led lights on the board (not the one on the chip that blinks)
Go to your networks on your device and connect to the "WifiModule"
network, as when setting the module up initially, but instead of
hitting the WifiModule connect page, instead type the address - 
192.168.4.1/TextInput 
This will pull up the text input page where you can enter the text 
message and hit "Submit" button on the page.
Once the module automatically re-connetcs to wifi, refresh the display
by pressing fast set & slow set simultaneously, and the message will 
be displayed on seconds count 43.
 

Time zone 1; EST      
Time zone 2; CST
Time zone 3; MST
Time zone 4; PST
Time zone 5; AKST
Time zone 6; HAST
Time zone 7; BST
Time zone 8; CEST
Time zone 9; MSK
Time zone 10; PHT
Time zone 11; ACST
Time zone 12; Asia/Seoul
Time zone 13; SGT (Singapore)
Time zone 14; IST